Conference Audio Visual
Audio visual Design & Build
2018
Control - Apple, Labgear
Pemberley first ran cat 6 from under the till area to three locations. The projector in main floor area, Screen in the garden area and one to DJ area. Also, a mobile screen which can be used so Pemberley tested the receiver using the HDMI that was previously being used for the project.
Pemberley fixed the cable management. Pemberley put the mag box, UPC box, amp, cloud and transmitter all under the till, rerouted the cables and removed all that was not needed.
The iPad bracket was moved to an agreed location and everything was tested.
Conference Audio Visual
Audio visual Design & Build
2018
Visual - Saorview, Ferguson
Control - Labgear
When Pemberley arrived first thing that was done was the dish and aerial were put on the roof.
Two labgear Tx/Rx kits were installed and wired to two ceiling mounted Samsung screens. We also installed two Combo ariva boxes and one IR kit.
Pemberley then ran the cabling from the 6th to the ground floor then labelled and cable tied them all.
Conference Audio Visual
Audio visual Design & Build
2018
Visual - LG
Control - Wyrestorm
Pemberley joined CAT6 from the window side of the reception to the screen side and installed the Wyrestrom.
Pemberley De-Rigged the Extron RX then installed the Wyrestorm RX.
Pemberley installed a 43" LG screen and ran CAT6 and power under the floor from the reception desk to the screen.
Pemberley installed the house pc and Wyrestorm TX in location outside the main comms room to allow for different people to be able
to access the PC.
Then patched in Wyrestorm and two RX and re-routed and linked the Extron DA to second floor RX
Conference Audio Visual
Audio visual Design & Build
2018
Visual - Philips
Mounts - Unicol
First Pemberley installed a unicol pole system from the ground up and Drilled to raised ceiling floor tile.
Pemberley then from the unicol pole to the pop out on the table ran Hdmi, VGA, Patch, Power and the Polycom mic cable.
The tv screen was mounted on a pole system and then we used velcro to put the Polycom VC onto the back of the screen.
All was tested by pemberley and works Perfectly with no problems.
Conference Audio Visual
Audio visual Design & Build
2018
Visual - Samsung
Mount - Pmv
Pemberley installed four 32 inch Samsung screens in the new booths. Three are located on the ground floor in the canteen.
The other one is on the first floor beside the new meeting rooms. Each screen has a HDMI cable coming up onto the desk.
Pemberley then pre set the source on the screens so that when you connect anything up to HDMI it picks it up.
Conference Audio Visual
Audio visual Design & Build
2018
Visual - Sony, Crestron
Audio - Sennheiser, Audio-Technica, Extron
Mounts - Unicol
Control - Extron
Pemberley was asked to come to ESRI and do one of there conference rooms.
Pemberley First Derigged the old projector, screen and speakers the the conference room.
They then installed a new sony projector on a new Unicol mount and installed the 2.5 metre electric screen
They also installed a crestron auto switcher at the podium and receiver at projector and two Audio Technica goosenecks were also installed into the podium.
Pemberley then wired up the mlc and have the screen coming down on IR commands.
A HDMI wall plate was installed on the far side of the room incase they have dual presenters
Also installed Extron ceiling tiles and derigged all equipment from the rack.
An Extron dmp 128 was installed and wired up to suit projector audio input along with 2 podium / 2 new handheld mics and 1 new lapel mic and wired the output to the amplifier.
Conference Audio Visual
Audio visual Design & Build
2018
Control - Kramer
Pemberley installed Kramer WP20 Ultra HD HDBaseT active all plate auto switcher and a Kramer
TP-580 Receiver HDMI Bidirectional over HDBaseT Twisted Pair Receiver. Pemberley ran shielded cat 6 from the plate up to
the projector and ran Uni one from Kramer WP20 back to the rack. Pemberley then fully tested everything in this room.
Pemberley also a installed Kramer WP20 Ultra HD HDBaseT active all plate auto switcher and a Kramer
TP-580 Receiver. HDMI Bidirectional over HDBaseT Twisted Pair Receiver in this room as well.
We did the same in this room as we did in then Kingston meeting room when doing the cables.
Room was then fully tested.
Pemberley installed Kramer WP20 Ultra HD HDBaseT active all plate auto switcher and a Kramer
TP-580 Receiver. HDMI Bidirectional over HDBaseT Twisted Pair Receiver in the Dargan Meeting room as well and
also ran cat 6 from the plate up to the projector and ran Uni one from Kramer WP20 back to the rack the same way as the other rooms.
Conference Audio Visual
Audio visual Design & Build & Upgrade
2018
Visual - Mersive Solctice
Control - Extron & Kramer
Audio - Extron & Sabre & Sennheiser
When Pemberley arrived they first derigged all the old equipment and then began
running new cabling from equipment location and podium location to projector.
Then cut out podium back box to mount the WP20. They then installed the Extron mlc at the agreed location.
Pemberley installed 5 sennheiser mics and wired them into the Extron dsp and connected
up the outputs to the amplifier and deaf aid loop system. They also installed 6 new ceiling speakers and
got the vcr working and wired through to allow tv stations in the room and installed the solstice pod then configured it onto their network.
Conference Audio Visual
Audio visual Design & Build
2018
Visual - NEC, Solstice, Dalite
Audio - QSC, CTG
Mounts - Chief, Unicol, Vaddio
Control - Crestron
Cardinal Health requested Pemberley Audio Visual Solutions to Design and install an AV System and Conferencing.
Pemberley installed three NEC 43" LCD large format display full HD with Chief small tilt wall mounts.
We installed three NEC 65" LED large format displays full HD with Chief wall bracket and medium fusion fixed wall display mounts.
Pemberley Also installed Crestron MPC-M5 and MPC-M10 media controllers and a HDMI wall plate.
Also installed were QSC AC-C2T Speakers and QSC SPA2-100 Amplifiers as well as a Solstice pod and Crestron HD-MD-400-C-E and
HD-MD-400-C-E HD scaling auto-switcher and extender.
One NEC 80" LCD/LFD Display with Chief large fusion fixed wall mount was also installed.
Crestron MPC-M5-W and Crestron MPC-M10 media presentation controller and HDMI wall plate also installed by Pemberley.
Pemberley then installed QSC AC-C2T Speakers, QSC SPA2 amplifier,Solstice pod and Crestron HD-MD-400-C-E and
HD-MD-400-C-E HD scaling auto-switcher and extender.
We installed a NEC Full HD DLP technology projector, Unicol projector mount and a Dalite advantage 130" electric screen.
Installed another NEC projector a ANSI lumens projector, Dalite Advantage 130" electric screen and Unicol projector mount.
QSC AC-C2T speakers, QSC amplifiers and CTG CM-01 ceiling microphones were installed as well as the Sennheiser vocal system
condenser range and Sennheiser theater and presentation system and Solstice pod.
We also installed a Vaddio roboshot 30 QCCU system, Vaddio suspended ceiling mount and a crestron usb Extenstion, Crestron 7" touch panel,
Crestron AV3 3 series control system, Crestron digital media switcher also installed a Crestron DMC-4K-C-DSP-HDCP2 HDBaseT 4K Digital input card with downmixing,
Crestron DMC-4K-CO-HD-DSP-HDCP2 4K HDMI input card with downmixing, Crestron DMC-4K-CO-HD-HDCO2 2-channel HDBaseT output card and Crestron DMC-4K-CO-HDO
2-channel 4k scaling HDMI output card all for DM switcher.
Also installed in the training room is Crestron Digital Media Transmitter 201 and a wall plate 4K digital media transmitter, DM-RMC-4K-100-C 4K digital media receiver and room
controller as well as a Biamp Tesiera forte with dual voip interface and UPS for all equipment within rack and a chief 48" 28U rack with 2 tray drawers and fans for cooling.
In all signage locations pemberley installed a NEC 55" LCD large format display full HD, Moxie Onmivex moxie player and Chief wall bracket medium fusion fixed wall display mount.
The portable trolley system installed by pemberley Chief large fusion manual adjustable mobile cart with a smart 65" pro interactive board 4k UHD.
Conference Audio Visual
Audio visual Design & Build
2018
Visual - Sony & Euroscreen & Strong 4k Android Box
Audio - Sony
Mounts - Chief & Kramer
Control - Extron
Fitzpatrick Castle Hotel requested Pemberley Audio Visual Solutions to Design, install and upgrade an AV System with Web Conference.
In suite 1
Pemberley installed a Sony projector to a projector mount.
Pemberley then installed a MLC keypad controller and upgraded the room to HDMI over cat6.
Pemberley installed the electric screen for the projector and installed a 4k android box.
In suite 2
Pemberley Installed a 75" Sony 4k led display.
They also upgraded the room to HDMI by putting in a HDMI wall plate.
Pemberley put in the TEOS Connect BRAVIA license onto the 75" Sony Led display to give the client a wireless presentation system.
This is the same in suite's 3, 7 and 8.