Conference Audio Visual
Audio visual Design & Build
2018
Visual - Sony, Crestron
Audio - Sennheiser, Audio-Technica, Extron
Mounts - Unicol
Control - Extron
Pemberley was asked to come to ESRI and do one of there conference rooms.
Pemberley First Derigged the old projector, screen and speakers the the conference room.
They then installed a new sony projector on a new Unicol mount and installed the 2.5 metre electric screen
They also installed a crestron auto switcher at the podium and receiver at projector and two Audio Technica goosenecks were also installed into the podium.
Pemberley then wired up the mlc and have the screen coming down on IR commands.
A HDMI wall plate was installed on the far side of the room incase they have dual presenters
Also installed Extron ceiling tiles and derigged all equipment from the rack.
An Extron dmp 128 was installed and wired up to suit projector audio input along with 2 podium / 2 new handheld mics and 1 new lapel mic and wired the output to the amplifier.
Conference Audio Visual
Audio visual Design & Build
2018
Control - Kramer
Pemberley installed Kramer WP20 Ultra HD HDBaseT active all plate auto switcher and a Kramer
TP-580 Receiver HDMI Bidirectional over HDBaseT Twisted Pair Receiver. Pemberley ran shielded cat 6 from the plate up to
the projector and ran Uni one from Kramer WP20 back to the rack. Pemberley then fully tested everything in this room.
Pemberley also a installed Kramer WP20 Ultra HD HDBaseT active all plate auto switcher and a Kramer
TP-580 Receiver. HDMI Bidirectional over HDBaseT Twisted Pair Receiver in this room as well.
We did the same in this room as we did in then Kingston meeting room when doing the cables.
Room was then fully tested.
Pemberley installed Kramer WP20 Ultra HD HDBaseT active all plate auto switcher and a Kramer
TP-580 Receiver. HDMI Bidirectional over HDBaseT Twisted Pair Receiver in the Dargan Meeting room as well and
also ran cat 6 from the plate up to the projector and ran Uni one from Kramer WP20 back to the rack the same way as the other rooms.
Conference Audio Visual
Audio visual Design & Build & Upgrade
2018
Visual - Mersive Solctice
Control - Extron & Kramer
Audio - Extron & Sabre & Sennheiser
When Pemberley arrived they first derigged all the old equipment and then began
running new cabling from equipment location and podium location to projector.
Then cut out podium back box to mount the WP20. They then installed the Extron mlc at the agreed location.
Pemberley installed 5 sennheiser mics and wired them into the Extron dsp and connected
up the outputs to the amplifier and deaf aid loop system. They also installed 6 new ceiling speakers and
got the vcr working and wired through to allow tv stations in the room and installed the solstice pod then configured it onto their network.